What are the processes involved in making fishing rod equipment?

Publication Time:

2021-10-26 11:04

Source:

Throughout the entire fish tank manufacturing process, fishing equipment needs to go through various procedures, each of which is crucial. Below is a detailed introduction to the rod making process for fishing equipment: 1. Design Manufacturers with good development technology have extensive experience in making fishing rods, so they can design molds based on requirements such as type, color, and length. However, experienced manufacturers indicate that these designs lack understanding of the materials used in imitation products, such as the number of layers and the wrapping of carbon fiber fabrics. Sometimes, to highlight the color and enhance functionality, the original designer even sets several tapered proportions in the fishing equipment mold. Because

What are the processes involved in making fishing rod equipment?

Throughout the entire fish tank manufacturing process, fishing tackle equipment needs to go through various procedures, each of which is very important. The following is a detailed introduction to the rod making process of fishing tackle equipment:

1. Design

Manufacturers with good development technology have rich experience in making fishing rods, so they can design molds according to the required types, colors, lengths, etc. However, experienced manufacturers indicate that these designs do not understand the materials used in imitation products, such as the number of layers of T-number and carbon fiber fabrics. Sometimes, in order to highlight its color and enhance its function, the original designer even sets several tapered proportions in the fishing tackle equipment mold. Therefore, manufacturers will continuously accumulate experience during the development process, design different molds for different functions, lengths, and colors, and then proceed to the next step.

Fishing tackle equipment

2. Cutting fabric

After the fishing tackle equipment mold is made, the next step is to cut the fabric. Generally speaking, the required number of winding layers is designed before cutting the fabric. Sometimes, not only is the number of layers different for each section, but there may also be different numbers of layers or special reinforcement requirements on the same section of the bare rod.

3. Curling

Currently, single-sided adhesive tape has been pre-applied to the carbon fiber fabric. Manufacturers only need to preheat one side of the cut carbon fiber fabric and iron it on the fishing tackle equipment mold.

4. Rolling

After ironing, it needs to enter the rolling process. This process is short for "rolling the bare rod". At this time, the prototype of the fishing rod has appeared. Generally speaking, a rolling machine is needed when rolling the fishing rod.

5. Tape packaging

After winding, the carbon fiber fabric is wound around the outside of the fishing tackle equipment mold like an egg roll, but the adhesive attached to the fabric will not dry and solidify immediately. Even during the period when it is not completely dry, delamination between fabric layers may occur. Therefore, it is necessary to strengthen the adhesion of the rod embryo, and this effect is called "wrapping".

6. Solidification

After the winding steps are completed, these semi-finished products will be put into an oven for heating. It is put into the oven for heating to help the adhesive in the carbon fiber fabric layers melt in a high-temperature environment, fully bond each layer of fabric, and then penetrate into the fabric dimensional reinforcement structure. Generally speaking, skilled manufacturers will choose an oven with stable temperature control and store it at 125℃ to 130℃ for about two hours.

7. Demolding

The removed rod blank is still attached to the fishing tackle equipment mold, so it needs to be separated to complete the next processing process. Therefore, these rod blanks containing molds need to be placed on a demolding machine and the mold removed. After the molds are removed one by one, the outer layer of wrapped and solidified tape should be removed.

8. Determination

When cutting the fabric and rolling the bare rod, a section is reserved at the head and tail to avoid errors and facilitate processing. Therefore, at this stage, it is necessary to cut off the excess part according to the original design size.

9. Grinding

In fact, the surface of the carbon fiber fabric is a bit rough, which is not only uncomfortable to the touch but also unsightly. Therefore, in order to increase the strength of the product, the surface is usually ground to facilitate processing and increase the coating effect in the future. The cut bare rod should first be evenly coated with supplementary soil and then rotated on a grinding machine. At this time, sandpaper should be used to manually grind off the excess supplementary soil.

What are the functions of fishing equipment?

What is the installation and use of fishing gear equipment mold cleaning machine?

Learn how to select a suitable carbon fiber equipment manufacturer to improve production efficiency and achieve economic benefits.

Market analysis of carbon fiber equipment in the technology manufacturing industry

Carbon fiber products and equipment play a significant role in the technology manufacturing industry. This article will conduct an in-depth analysis of the market conditions of carbon fiber equipment in the technology manufacturing industry and discuss its development trends. With the widespread application of carbon fiber products, the demand for the carbon fiber equipment market is constantly growing. However, market competition is fierce, and enterprises need to enhance their competitiveness through technological innovation and brand promotion. At the same time, the continuous innovation of carbon fiber equipment technology provides more possibilities for the development of carbon fiber products.

Prospects and development trends of carbon fiber product equipment manufacturing

To learn more about the prospects and development trends of carbon fiber product equipment, please read the detailed content of this article.

Focusing on carbon fiber equipment, Weihai Yafeida leads the technological manufacturing industry

Weihai Yafeida leads the technological manufacturing industry, winning market recognition with its advanced carbon fiber equipment. As a leader in the field, they continuously innovate and develop products to meet customer needs. Weihai Yafeida boasts advanced production equipment and process technology, focusing on cooperation and communication with customers, and providing various after-sales services. In the future, they will continue to lead the development of the technological manufacturing industry and provide customers with better carbon fiber equipment.

High-quality carbon fiber equipment manufacturer, Weihai Yafeida at your service

Weihai Yafeida is a leading enterprise specializing in the manufacturing of carbon fiber equipment, providing high-quality customized solutions for customers. They possess advanced production processes and a technical team, and focus on innovation and quality control. Compared to other competitors, Weihai Yafeida has profound expertise and experience in the field of carbon fiber materials. Their professional team will provide customers with various support and services to ensure the smooth progress of projects. Contact Weihai Yafeida immediately to enjoy high-quality carbon fiber equipment manufacturing services!

Innovative technology leads the carbon fiber equipment manufacturing industry

Carbon fiber equipment plays a significant role in modern industry, and with continuous technological innovation and development, it is constantly leading new trends. This article will introduce relevant information about carbon fiber equipment and discuss its applications and prospects in innovative technologies.